*Sub Menu l

 BTF14-980P200 / BTF14-980P100

  ¡ã go to top

 

 

 

 

 

Fiber-Optic Products

EDFA Pump Lasers

BTF14-980P200

 

 

Specifications :

. Wavelength 980nm
. 200mW
. Optional Fiber Bragg grating stabilization available.
. Self contained thermistor and TEC
. Telcordia¢â GR-468-CORE compliant

Functions

. DWDM EDFAs demanding high power
. with stabilized wavelength
. Metro area and high node count
. distribution and CATV trunks

Features

. Up to 200mW kink-free fiber output
. Industry-standard, fully floating pinout configuration
. Epoxy-free, fully hermetic laser-welded package
. Corning Flexcore 1060 fiber pigtail standard
. (250§­ diameter, 6§­ core)

 


 

 


The BTF14-980P200 laser diode pump module is ideally suited for pumping erbium-doped fiber amplifier systems (EDFAs), such as those used in metro area dense wavelength - division multiplexing (DWDM) products and cable TV networks. Operated in Continuous Wave mode, BTF14-980P laser diode pump modules are available from 60mW to 200mW.

Designed and manufactured to meet rugged Bellcore GR-468 requirements, BTF14-980P pump modules are available in 14 Pin Butterfly packages.

The BTF14-980P uses fiber Bragg grating to stabilize the wavelength. The wavelength is ¡°fixed¡± to provide a narrow band spectrum despite fluctuations in temperature. The grating also provides for an absence of noise with constant changes in drive current, feedback, and other hard to control environmental conditions.

 

 

 

 

 

 

Fiber-Optic Products

EDFA Pump Lasers

BTF14-980P100

 

 

 

Specifications :

. Wavelength 980nm
. 100mW
. Optional Fiber Bragg grating stabilization available.
. Self contained thermistor and TEC
. Telcordia¢â GR-468-CORE compliant

Functions

. DWDM EDFAs demanding high power
. with stabilized wavelength
. Metro area and high node count
. distribution and CATV trunks

Features

. Up to 200mW kink-free fiber output
. Industry-standard, fully floating pinout configuration
. Epoxy-free, fully hermetic laser-welded package
. Corning Flexcore 1060 fiber pigtail standard
. (250§­ diameter, 6§­ core)

 


 

 


The BTF14-980P100 laser diode pump module is ideally suited for pumping erbium-doped fiber amplifier systems (EDFAs), such as those used in metro area dense wavelength - division multiplexing (DWDM) products and cable TV networks. Operated in Continuous Wave mode, BTF14-980P laser diode pump modules are available from 60mW to 200mW.

Designed and manufactured to meet rugged Bellcore GR-468 requirements, BTF14-980P pump modules are available in 14 Pin Butterfly packages.

The BTF14-980P uses fiber Bragg grating to stabilize the wavelength. The wavelength is "fixed" to provide a narrow band spectrum despite fluctuations in temperature. The grating also provides for an absence of noise with constant changes in drive current, feedback, and other hard to control environmental conditions.