|
Fiber-to-Fiber
The Fiber-to-Fiber
Coupling System consists of the FiberBench Base with
FiberPorts and two (input & output) FiberCables
(distal end is cleaved). The Fiber-to-Fiber Coupling
System is "empty", containing no Optical Component
Modules, and is used for coupling light from one fiber
to another across an open air-gap.
In all FiberBench
Coupling Systems using OFR PM FiberCables, both the
slow axis and the FC receptacle keyway are vertical.
Both the plane of polarization and the fiber stress
rods are vertical.
A major feature of OFR FiberBench
Coupling Systems is stability. Transmittance remains
constant after temperature change, shock and vibration
far greater than experienced in typical laboratory use.
|
|
|
|
|
|
|
|
Values shown are for
single-mode fiber operating at 1310nm
or 1550nm.
Insertion loss can be
higher with shorter wavelengths.
|
|
|
|
|
|
When ordering, specify
option as follows :
¥ë: Wavelength
in nm
X : Connector Interface(FC/APC)
Y
: Permanent Pigtail
Y
: For example FFBS-S-1310-X
KIT...Fiberbench
Systems are also available as Build-it-Yourself
KITs...
|
|
