Fiber-Optic Products

Fiber Optic Isolators

Isolators

Polarization
Independent Isolators

OFR Polarization Independent Isolators are pigtailed with 1 meter of single-mode fiber. Fiber ends are cleaved or can be optionally FC connectorized.

Isolators for non-standard ル's are available.

IO-H-1550

Custom isolators for high
quantity production

* Measured at 90% of peak ル
NOTE : Inquire about economically priced ＾B Models￣with sligthly downgraded spec's.

* Measured at 90% of peak ル.
* Power is limited by fiber. Isolator itself is capable �20W.


IO-F-980 Polarization-Independent Isolator

Polarization
Dependent Isolators

OFR Polarization dependent Isolators are pigtailed with 1 meter of PM fiber. Fiber ends are cleaved, or can be optionally FC connectorized Isolators for non-standard ル's are available. available.

Inquire about isolator development
and special packaging

Custom, mini and micro Isolators.

* Measured at 90% of peak isolation

* Measured at 90% of peak isolation
** Power is limited by fiber. Isolator itself is capable �20W

Laser-Interface Isolators

The OFR Laser-Interface Isolator permits coupling of a free-space laser beam into the FiberPort, at the same time isolating the laser. IO-PAF isolated FiberPorts contain an OFR IO-D＾Aspirin Tablet￣Isolator with insertion loss �0.2dB and isolation 40-45dB. Standard wavelengths are 1310nm and 1550nm, and others are available. When ordering, specify vertical or horizontal input polarization. Fiber Cable is ordered separately.

IO-PAX-X-7-980

ル : specify wavelength 980, 1310 or 1550nm,
for example, IO-PAF-X-11-1550.