Opto-mechanics

Lens Mounts

EXTRA RETAINING RINGS

LMR 05 : H=0.99",W=0.64",T=0.30",0.535"-40 thread(フ0.50 I.D.)
LMR 1 : 1.78"O.D. x 0.40" thick with 1.035"-40 thread(フ1.008" I.D.)
LMR 1.5 : 2.28"O.D. x 0.50" thick with 1.535"-40 thread(フ1.508" I.D.)
LMR 2 : 2.78"O.D. x 0.50" thick with 2.035"-40 thread(フ2.008" I.D.)

- LMR 05 accepts フ1/2" optics up to 0.21"thick
- LMR 1 accepts フ1" optics up to 0.26"thick
- LMR 1.5 accepts フ1.5" optics up to 0.38"thick
- LMR 2 accepts フ2" optics up to 0.38"thick
- Mounts directly to our フ1/2" diameter posts
- via an #8-32(M4) Tap

LM1-B and LM2-B both have #8-32(M4) mounting holes.

Retaining Rings Included

Nested lens mounting set; the inner ring which holds te optic can be removed from the outer ring. This allows easy exchange of optics while maintaining optical alignment.

Directly mounts a microscope objective with standard RMS threads to 1/2" diameter posts via an #8-32(M4) mounting hole.The CMR directly mounts camera lenses with standard C-Mount threads (1.00"-32) to our 1/2" diameter posts via an #8-32(M4) mounting hole.