- Removable knobs Expose Hex Sockets
- Heavy Duty Springs for Stability
- Angular Range : ±4。
- 1/4"-80 Adjustment Screw with Matching Brass Sleeves

Hex Key sold separately

Removable knobs expose hex sockets

HIGH STABILITY FEATURES

. Hardened Inserts Under Adjustment Screws
. Brass Sleeves for Smooth Adjuster Feel
. 3/16"-100 TPI Precision Adjusters

- Hard Inserts Under Adjusters
- Custom Modification Available
- Compact Design

Hex Key sold separately

The KMS has the same enhanced features as the KM1 design except in a smaller package. The overall dimensions are :

1" Wide x 1-1/8" High, 0.59" Thick, with a 1" sq. front plate.

Removable knobs expose hex sockets

Same high stability features as the KM2 with the added feature of 1.12" maximum clear aperture at 45。

- ±5。Angular Rotation,
- ±3mm Linear Translation
- Compatible with our Cage Assemblies
- Flexure Locking Mechanisms
- allow independent locking of
- all 3 adjusters

The KC1-PZ combines the mechanical features of the KC1 with the electro-mechanical features of our piezo-electric stack AE0505D08. The piezo-electric stacks are mounted in the front plate directly under the tips of the three adjuster screws. This allows for a coarse and fine control of both the translation and the angle of the front plate.

ELECTRONICS

MECHANICAL

. 10 Arc Sec Angular Resolution
. ±4。Mechanical Angular Range
. 3mm Translational Range

MECHANICAL

. 6 Arc Sec Angular Resolution
. 30 Arc Sec Angular Range
. 8Л Translational Range

The KM1-T mounts thin フ1" optics up to 1/8" (3.2mm) thick, ideal for stress free mounting-A threaded mounting cell accepts 1" diameter optics. The KM2-T mounts thin フ2" optics up to 1/4"(6.4mm) thick.

Removable knobs expose hex sockets

RETAINING RINGS
INCLUDED

Kinematic mounts for microscope objectives, used to mount any
microscope with standard RMS 0.800"-36 threads.

Removable knobs expose hex sockets

Removable knobs expose hex sockets

Removable knobs expose hex sockets

Expanded Prism Selection

The KS05 features three lockable adjusters in combination with a rugged mechanical design to provide a truly set-and-forget optical mount. These mounts include all three adjusters and are shipped completely assembled.

Removable knobs expose hex sockets

- 100 TPI Adjusters
- 3 Lockable Adjusters
- Tilt & Translation
- Ultra-stable Design
- #8-32(M4) Tapped Mounting Hole

The KS1 features locking adjusters in combination with an ultrastable mechanical package to provide a truly set-and-forget optical mount. These units are shipped completely assembled, with all three lockable adjusters included.

- Tilt & Translation
- Ultrastable Design
- English/Metric Compatible
- Relief Cuts for Finger Access

- 3 FlexlockTM Adjusters
- Tilt & Translation
- Ultra-stable Design
- English/Metric Compatible

- FlexlockTM Adjusters allow independent locking of both adjusters
- Hard inserts under adjustment screws ensure stability
- Adjusters have mating brass bushing
- 80 "threads per inch" adjustment screws

* Mounting holes accept either #8-32 or M4 mounting screws.

The true Gimbal Design locates the optical surface on the rotating axes (Gimbal Axes) thus providing pure rotational motion.

DESIGNED FOR INTRA-CAVITY USE

- True Gimbal Design
- ±2.5。GM100(±2.0。GM200) Angular Range
- Graduated Adjuster Knobs (50 divisions per revolution)
- Hardened Steel Drive Mechanism provides long term stability

RELATED PRODUCT

UTILITY MOUNTS

- Total Travel ±3。
- Graduated Knobs, 50 divisions per revolution
- 0.005 Degrees per divisions
- Mounts フ1" Optics